4    C    2.2  Lead-in recommended as data track

 5    C    2.3.1 TitleBecomes "First CDI track"

      C    2.3.1Delete 2nd sentence

      E    Last line
           before para 1    Define Sdl,Fdl

22    E    4.5.2.4 last lineReference: "VI.4.2"

      E    References Correction

25    C    End  Allowed sector types

29    C    Fig. II.15 Add missing last three lines


******* Replace all the pages (30) of Chapter III ********


  i   C    3.3  Sector Subheader Format

  2   E    Last line - 1    required on every CD-I

  4   C    2 first fields
           deleted    Alignment on ISO 9660

      C    Other fields     - Copyright and Abstract file   name  fields 
are 37 bytes long
                  - Bibliographic file name is  added
                  - Date and Time fields are now    17 bytes long
                - Fields reserved to application

  5   C    2nd para   Deleted (ISO 9660)

      E    Last 2 paraShifted left

  6   E    First para with a space character

      E    Fig.III.2
           line 2,3   only an escape sequence

      C    Bits 1 and 2     Reserved

  8   C    2nd para   Add Bibliographic file name

  9   C    Fig.III.3  Example adjusted to ISO 9660
                
 10   C    Fig III.4  Boot record adjusted to ISO 9660 - First 2  fields 
suppressed
                  - Field after Boot identifier deleted (was reserved)
                  - Last field reserved to Boot System use
      C    Last para - 3    Boot record block number deleted

      E    Last para - 1    with a space character.
                
 11   C    Fig. III.5 Example adjusted to ISO 9660

 12   C    Fig. III.6 Terminator record adjusted to ISO 9660
                - First 2 fields deleted
      
      C    Last para - 5    Terminator record block number deleted

 13   C    Fig. III.7 Example adjusted to ISO 9660

 16   E    Last para  can be done within

 19   C    Fig. III.8 Add "Reserved " field between "Creation date"  and 
"File flags"
                (ISO 9660)

      C    Fig. III.8 Change File protect code into "Reserved"

      E    Last para   By convention  the size of  Form 2  sectors   is  
      considered as

 20   C    Last para - 4    "For non interleaved files.." is added

      E    Last para - 3    Album Set Sequence Number
                
      E    Last para - 2    on an even offset

      E    Last para - 1    by this directory record

 21   E    line 6     user
      
      C    Last para -1     Deleted

 22   C    Fig. III.10Example adjusted to ISO 9660

 23   C    Fig. III.11Fields 1 and 3 are exchanged
                (ISO 9660)

      C    Last and
           last -2 para     Exchange of fields

      E    2nd para, line 1 Reference to Fig III.12,III.13
           
 24   E    para 3     If there is more..




 25   A    3.4  Sector Subheader Format. Deleted

      E    last line  ascending order of the file name

 26   E    first line contiguous blocks

      E    line 3     which is the number of the

 27   E    Fig III.14
           1st para   in III.3.3

 28   E    2nd para, line 4 see VII.2.2

 29   E    2nd para. line 3 such a critical timing

      

  1   E    End  Abreviations defined

                

  i   C    2.3.1Deleted : Reduced screen ....

      E    3.1.3becomes : Other image formats

      C3.1.4Added : Meaning of             Compatibility

 ii   C    4.6.2becomes Loading DYUV start   values.

      C    4.6.3      Deleted

      E    4.8  Title is 525/625 Line Image  Interchange
      
iii   A    5.5.3Add V.5.5.3 Dual 7-bit CLUT

      C    5.13 becomes Backdrop

      C    5.14 Becomes Interlace

 iv   E    V.6 Title  becomes On-disc Coding Formats

      C    6.1  becomes General

      C    6.1.1 , 6.1.2     deleted :RTCA no longer     6.1.3 ,   6.1.4 
mentioned here
      
      C    6.2  becomes Video Data Sequences

      C    6.2.1Add V.6.2.1  Packing of VDSQs

      C    6.6  deleted

  v   C    V.11 deleted

      E    V.3,       corrected page number

 viAV.35aAdd : 525/625 line image    interchange

 3    C    Fig. V.1   Clarification : precise
                Form 1, Form2
      
      E    Fig V.1    RL, Data above line

      C    2nd para.  to allow two independent image
           last line  planes

  5   E    2.2.1First paragraph extended

  6   C    Last para -1     High Resolution definition clarified

  7   C    Fig. V.4   Deleted Reduced Screen and Border
           
      E    Last para  Shift to next page

  8   E    First para Shifted from previous page

      C    line 1     of the Display Safety

      C    para 2.3.1 Deleted

 10   E    Last para        Deleted (not needed)

 11   C    2nd para   Rewritten omitting references to Reduced Screen

 14E3.1.1"full screen" deleted at lines 3 and 6

      C    3.1.2Clarification : compatible
           2nd para   format     

 15   E    line after
            Figure V.10      Reference to the definition of  "compatible" 
added

      C3.1.3'Other Image  Formats'  added. Describes  possibilities  for   other 
                                                         image formats







 16   C     New page    Defines compatiblity,  deletes description    of 
"shifts" from               encoding section

 17   E    1st line   of the three main image formats in...

      C    Fig. V.12  Delete Reduced Screen

      C    Last para before Clarify and delete reduced
           Fig. V.13       screen

      CFig V. 13Delete Reduced Screen column, change height of 625 line   safety 
                                                         area to 210 pixels

      CLast para     Added to explain height of 625 lines safety area

 20   E    3.4:Last   The bandwidth ....
           sentence -1is 0.5 the bandwidth for Y

 21CLast encodingDefine Yc,Uc,Vc as functions equationsof R,G,B values

 32   A    2nd para   Precise usage of CLUTs defined
                and text added for dual 7-bit CLUT

 33   A    3.7.1, para 3    Text added for dual 7-bit CLUT

 37   C    First para.Deleted

      E    Figure V.23Caption    shifted

 38   E    Figure V.24      Caption  shifted
      
 45   E    Last para  Moved from page 46

 46   E    First para Moved to page 45

      C    Fig. V.27  Clarified Quantization Levels

      E    Last para. Moved to p.47





 47   E    First para.Moved from p.46

      C    4.4.3.4    Clarified Quantization Levels

 51   C    Fig. V.28  Use of Plane A/Path 0 in
                dual 7-bit CLUT
      
      A    Last line  Add text for dual 7-bit CLUT

 52   A    Restrictions (2) Add text for dual 7-bit CLUT


 53   E    Last para line 1 'application-specific'

      C    After last para  New para added

 54   C    Last para. Display parameters are not guaranteed from   field 
to field

 56CFig.V.33Deletion of "No operation" and "Load Border Color"

      C    Note 1     Deleted

           Note 2     Revised and changed to Note 1

      E    4.5.2Shifted to next page

 57   E    4.5.2Shifted from previous page

      C    4.5.2.2 insert   Clarification
           3rd para.  

 58   A    4.6.1Add CS (CLUT Select) for dual 7-bit CLUT

      C    New table  Clarify functions of CM0,CM1

      E    Last line  Deleted (not needed)

 59   C    Last parameter   Deleted (RS reduced screen)

 60   C    4.6.2Delete Reduced Screen Display

      A    Fig. V.34  Add note for dual 7-bit CLUT

 61   E    4.6.2New number for Loading DYUV  Start values

 64   C    New page   Description of Compatibility mode and offset

 64 A C    New page   Compatibility

 69   C    line 2     Delete reduced screen

      E    Last line  Delete chapter

 73   A    5.5.3New section on Dual 7-bit CLUT

 77   E    Mix values Aligned

 87   C    5.11.1.2   Add clarification
           Last para  

 90   C    3rd para   Change text (after 1st sentence) on cursor origin

      C    after para 3     Clarify with new para

      C    after para 4     Clarify with new para

      C    5.13 Deleted

 91   C    Old Page   Border is deleted
           91 deleted 


 *****  Page numbering of the following pages is changed  ******

         Old pages V.91 to V.111 are replaced by
    new pages V.91 to V.105


 91   C    5.13 New paragraph number
      
      E    TableAlign "Black" line

 92   A    New page   Section V.14 'Interlace' added

 93C6.1New contents : RTCA is no longer mentioned
                Old sections 6.1.1,6.1.2 are deleted

      E    line 2     Video data can be contained

      A    line4Add precision on Video
      
      C    6.2  New paragraph numbering

      C    6.2 line 2 No reference to RTCA

      C    6.2.1New paragraph numbering

 94   C    end of 6.2.1     RTCA is no longer mentionned
                Old sections 6.1.4 , 6.2 are deleted

 97   C    Last para  Definition of Grouping Factor
                from next page
                

 98   C    paras 2 & 3Transferred to P.97

      C    para 1, 2ndAbove example, where the
           sentence   Grouping Factor is 3, the ...

      C    New last para    of e.g. line repeat

*** Pages 99 to 105 contain sections 6.4.4 and 6.5, which are not
changed ***
After
105   C    V.6.6      Deleted

        8  C    Para 2     Delete reference to RTCA

  9   E    3.1.1"ISO 8859-1" (line 1)

 11   E    Paras 1,2  "ISO 8859-1"

      E    Para 3     (line 4) "across"

 12   E    3.2  "ISO 8859-1"

 14   C    4.2  Delete reference to RTCA

Remark: Page  numbering of  the CH  VII table  of  contents is    entirely 
revised , the new page numbering is used thereafter...
      Replace old pages i to xii by new pages i to x




i     E    1.1.4Correct title

           1.3.3,1.3.4Deleted, not in text

      C    1.4  Deleted (simplification of File Protection)
      
      E    2.2.3.2    Delete one of the SS_Enable

      C    2.2.3.1 last     Delete SS_Raw from Getstat, add
           line -1    it to Setstat

 ii   C    2.2.3.2    Delete SS_Sig, SS_Relea

      A    2.2.3.2    Add SS_ReadTOC

      E    2.2.4.1    Correct Table of contents
                Delete SM_SSig, SM_Relea
                Add SM_Cncl,SM_Info
           
      A    2.2.4.1    New function SM_Stat

      E    2.2.4.2    Correct table of contents
                SD_MMix instead of SD_Mix
                Add SD_SMix

      E    2.2.4.3    Correct table of contents
                SC_Atten instead of SC_Loud

      E    2.3.2.5    Comes at line 4

iii   E    2.3.4.1    Correct table of contents
                Add DM_Cncl

      E    2.3.4.4    Correct table of contents
                Add DP_SCMM, DP_AFnt, DP_DFnt
                Delete DP_SFnt




 iv   E    2.3.4.5    Correct table of contents
                DR_CArc instead of DR_Arc
                Add DR_Erect
      E    2.3.4.6    Correct table of contents
                Title is Display control     functions
                DC_RdFI instead of DC_RdFT
                DC_WRFI instead of DC_WrFT
                Delete DC_Term

vii   E    3.1.4.2.1  Title is Standard...

      E    3.1.4.3.1  Title is Drive Tables

      E    3.1.5.4    Delete 3.1.5.4.1 and 3.1.5.4.2
                  Add SS_Raw, SS_Seek  SS_CDDA , SS_Mount

      A    3.1.5.4    Add SS_ReadTOC

      E    3.2.2.3    Correct table of contents
                Add 3.2.2.3 Driver static...

viii  A    after 3.2  Add 3.3 NRF driver interface

      C    VII.5Chapter deleted

      C    VII.6Chapter deleted

ix    C    Fig VII.5  Deleted (File protection)

      E    Fig  VII.10b     Page VII 38

      E    Fig. VII.11PCL instead PLC

      E    Fig VII.13 Page VII 57

x     E    Fig.VII.29 Becomes VII.30

      A    New Fig VII.29

      CLast 3  linesRTCA,  RTRI change,  old  Figs VII.30,  VII.31  and   VII.32 
                                                         deleted


 2    E    Lines 3, 6 Alphabetic ordering
      
      C    *F$Mask    Becomes *F$SigMask

      A    F$SRqCMem  New service

 4    E    F$Alarm    becomes *F$Alarm

      E    Fig.VII.3       Alphabetic ordering
           lines 2,5
      
      C    1.1.4Clarification in Signal handling

 5    C    1.1.4.1    F$SigMask instead of F$Mask

      C    1.1.4.1    Changed for clarification
           para 3     

      E    1.1.4.1    Use Disable/Enable signals
           para 1 and 3
      
      CInput Changed from d0.w to d0.l and d1.l

 8    C    A$AtJul    d2.w instead of d2.l

 11CCDRTOS routinesOld paras 7. and 8. of CDRTOS start up routine are deleted

      E    New paras 7,8,9  Come from next page (old paras 9, 10, 11)

 12   E    Old paras 9, 10, Go to previous page as paras 7, 118, 9

      E    CDRTOS routines  Old para 11 becomes
                9. Execute the initial process

      C    CDRTOS routines  Old paragraph 12. becomes
                10. Clean...( Warm start)

      E    Initial process  insert and play
           routine para 2.  

      C    Initial process  Deleted
           routine para 9   



      E    Last Para  System modules in  ROM

      A    Footnote 1 Explains Warm start

      E    Footnote  2Was footnote 1

 14   C    1.3.2New explanation

      **** pages 15 to 18 are left blank ****

      
 19   C    Last para -1     New para including Pipe File Manager

      C    Last para  No relation to hardware

 21   C    Fig.6b     New figure

 22   C    Blank page Fig. 6b (cont'd) deleted

 24   C    para 2.2.2.1,    three changed to four
           line 7

      C    End 1st para     Add SM_Out

 25   C    Fig. VII.8 Delete SS_Raw

 28   C    SS_Raw     Becomes Setstat, deleted here

 30   C    Fig. VII.9 SS_Raw is now a Setstat function

                SS_ReadTOC is a new function
                SS_SSig and SS_Relea deleted

 32   C    SS_Abort   Clarify errors
           End par 1

      E    SS_CDDA,line 4   Clarification

 33   E    line 8     Delete last 2 words

      Cline 5Effect of Pause (sentence deleted)

 36   C    SS_SSig, SS_ReleaDeleted
      
      C    SS_Raw     Becomes a Setstat function


      C    d1.w setstat code

      A    End  New function SS_ReadTOC

 37   A    Beginning  New function SS_ReadTOC

      CLast para - 1Revised, introduces the concept of CIL

 38                          C    PCB_Sig    Correction:  when Play   is 
                        finished, or on EOR

      CFig VII.10bCIL pointers instead of PCL pointers

 39   E    line 1     Overflow from previous page

      C    last 2 paras     Concept of CIL introduced

 40
 40 A C    New pages  Description of the CIL concept
 40 B

 40 B C    PCL_SMode  Change last sentence

 41   E    Layout     Modified (flowback to page 40B)

 42   E    Layout     Modified (flowback to page 41)

 43   E    Par. 4     Clarification
           lines 8,11

 49   A    End  New function SM_Stat

 53   A    After tableDefine File security mechanism

 54ABefore 2.2.5.2Define File security, add 'Opening a Raw Device'

 58   E    line 3     Delete also

 59   E    Begin par. 2     Add new first sentence

 61   A    last par -1Add or the DC_SSig...

 64   C    Fig VII.18 Delete $00 End instruction



      C    Old Note 1 Delete

      CNew Note 1Was Note 2 on p.65, and is revised. No check from UCM

 65ENote 2 Moved to previous page as Note 1 (revised)

 66   E    Region header     of region data structure

      E    Last para  of the region data structure
           line 3     

 68   E    last line -11    Add or ISO 8859-1..

 70   C    Fig VII 19 New layout

 71   C    Para 2     GDT required for all fonts

 72   E    Input (a0) pointer to path name of device

      C    output (a0)pointer to updated path name of device

 74   C    line 6     Eighty bytes

 78   C    MD_RgnId   is only 2 bytes

 80   C    line 2     Drawmaps may be of different types

 82   E    DM_Write, line 4 which correspond each to a line

 88   E    End  1st para      each line  of pixels  of  the cursor    is 
represented...

 89   E    GC_Org line 2    of the full screen image

 90   C    Blink constants  BON  and BOFF have 3 bits
           format     Correction of period value


 91   E    RG_Creat Region  References added to DR_Bfil  and Type  Codes 
9, 10,DR_FFIL
           11   Complex regions cannot be  created directly



 92   E    Para pred. (a0) = Address of region data
           region     structure

 97   E    line 1     Add in one colour register

      CDP_GFntloading of font is more precisely defined

110   E    last para, line 2use activated fonts

      E    last para line 5 undrawable characters

111   E    Top of pageWord overflow


118   A    DC_Intl    Addition to Input d3.w

120   E    line 4     in the

129   C    Cursor address   Example clarified (lines 3 and 4)

134   C    KB_Read    Events are queued
           First 2 sentences

141   A    Fig.VII.21 Add SS_Free

142   E    3.1.1, line 4    not concerned with files

      E    3.1.2, line 1    "six subroutines" (Write excluded)

143                          E    3.1.4Delete sentence  on CD  specific 
                        data structures

144   C    3.1.4.1.1  The first 72 bytes

145   E    Fig. VII.2.2,    CDFM
           line 1     

      A    Fig VII.22 Add PD_FC , PD_DNum and PD_BFctr
                and revise order

      C    3.1.4.2.1, line 1The first 42 bytes

      E    3.1.2.2.1, line 3may not be modified by them



146   C    Fig. VII.23PD_Prot becomes "reserved"

      C    PD_Fnum    2 byte field
           
      C    End table  Add PD_DTPtr,PD_PCLArr

147   E    First para ... fields ... are ....

      A    Fig VII.24 New contents

      E    Last para  To next page

148   E    First para From previous page

      E    Fig. VII.25Delete underline

      C    V_PATHS    4 bits

      C         V_NAP is introduced

149   C    Fig. VII.26New layout

150   C    Fig. VII.26New layout (continued)

      C    3.1.5 para 2     eight entries

      C    3.1.5 diskent    Add dc.w TRAP Trap entry point

      E    dc.w WRITE Now "(not used)"

151   C    3.1.5.1 Input:   (a1) becomes Device descriptor pointer
                Add (a4)

      E    (a6) System global data storage   pointer

      E                            3.1.5.2  Input:Change  "address"   to 
                             "pointer" in (a0), (a1), (a2)

151   C    3.1.5.2 Output:  "None"

152   E    3.1.5.4 line 2   Delete 'wild card calls'






      E    3.1.5.4 para 2   Clarification

      E                            3.1.5.4  Input:Change  "address"   to 
                             "pointer" in (a1), (a2)

      A    3.1.5.4 Input:   Add (a5)

153,4 E         Removal of text which is repetition of CDFM

153   A         Add SS_ReadTOC

      A    SS_Seek    Add (a0)

      A    SS_CDDA    Add d3.l and (a0)

154   E    Input:     Change "Address" to "pointer" in (a1), (a2)

      C    Input:     Add (a4)

      E    (a6) global data storage pointer

      C    Error output:    Add cc, d1.w

155   E    Input:     Terms revised

156   E    Input:     Change "Address" to "pointer" in (a2), (a6)

      E    (a6) data storage pointer
      
157   C    3.2.1      Explanation revised

158   C    3.2.2.1.1 line 1 The first 72 bytes

      C    last para  Clarification
           
159   C    Fig. VII.27Change "DV_DTP" to "PD_DTP"
                Add "PD_D2N" and reserved fields
                Change "PD_D3P" to "PD_D3N"
                Delete "PD_D4P"

      C    3.2.2.2,line 1   Delete or I$Create





160   C    Fig. VII.28Delete "PD_ADEV"
                Delete "PD_ASTAT"
                Add "PD_DFLGS"
                    "PD_Byte"
                    "PD_FEXEC"
                    "PD_EXTMOD"
                    "PDEModData"
                       Reserved Field

      E    3.2.2.2.3  Moved to new page 162

Replace old pages 161 to 215 by new pages 161 to 172


161   A    Fig. VII.29New figure

      A    para 1     New text Video driver fields

162   A    Top of pageNew text: Video Driver Fields

      E    3.2.2.2.3  Moved from page 160

      C    Fig. VII.30Renumbered and modified Fig. VII.27

      C    PD_Fc field      A deleted
           format

163   A    3.2.2.3    New Text
           
163   A    Fig. VII.31New figure

164   C    lines 4 and 6    Add IRQ as standard entry point

      C    3.2.3.1 para 2   New para

165   C    3.2.3.2 Input:   Change "Device" to "Path" in (a1)

      C    3.2.3.3 Input:   Change "d0.b" to "d0.l"

166   C    3.2.3.4    Revised text

      C    3.2.3.4 Input:   Add "d0.w"

      E    3.2.3.5 line 3   Delete 'and putting devices...'

167-171     A    3.3  New text for NRF Driver

172   C    line 8     and executing a function at a ..

      C    para 3     Clarification
      
      A    last line  Add The video line display interrupt


CD-I Full Functional Specification

Revision 3List of Amendments

Appendix V.1
_________________________________________________________________
Page      Type    Position             Change







      Insert new Appendix V.2 (Guidelines for 525/625
      Image Interchange (1 contents page and 8 pages)